CONTACT
Card holders, vertical

Card holders frosted:

Card holder frosted          Product description
Card holder frosted          Card holder frosted, vertical, with thumb notch.

To advice for ISO cards with an
intensity of 1,0 mm
inside dimensions: 85 x 52 mm
outside dimensions: 91 x 57 mm

Request for this product (Product-ID 013152)

Title:
Name*:
E-Mail*:
Phone:
Company:
Address:
Quantity*:
Comment:
*Mandatory



Card holder frosted           Product description
Card holder frosted           Card holder frosted, horizontal, with mounting bracket, for two cards with double thumb notch.

To advice for ISO cards with an
intensity of 0,76 + / - 0,08 mm
inside dimensions: 85 x 54 mm
outside dimensions: 91 x 58 mm

Material: Polycarbonate / Made in Germany

Request for this product (Product-ID 013049D)

Title:
Name*:
E-Mail*:
Phone:
Company:
Address:
Quantity*:
Comment:
*Mandatory



Card holder frosted          Product description
Card holder frosted          Card holder frosted, vertical, with mounting bracket.

To advice for ISO cards with an
intensity of 0,76 + / - 0,08 mm
inside dimensions: 56 x 86 mm
outside dimensions: 57 x 90 mm

Material: Polycarbonate / Made in Germany
Available with red, transparent and black extractor slide.

Request for this product (Product-ID 013151)

Title:
Name*:
E-Mail*:
Phone:
Company:
Address:
Colour
Quantity*:
Comment:
*Mandatory


Card holder frosted, coloured          Product description
Card holder, coloured          Card holder frosted, coloured, vertical, with long slot for clip, two round holes, thumb notch and recess.

For two cards. To advice for ISO cards with an
intensity of 0,76 + / - 0,08 mm
inside dimensions: 55 x 89 mm
outside dimensions: 60 x 104 mm

Available in transparent, black, white, blue, grey, green, yellow and red.

Request for this product (Product-ID 013186)

Title:
Name*:
E-Mail*:
Phone:
Company:
Address:
Colour
Quantity*:
Comment:
*Mandatory


Card holder Vario, frosted, horizontal/vertical          Product description
Card holder Vario, frosted, horizontal/vertical          Card holder Vario, frosted, horizontal/vertical, with thumb notch. With two pins for horizontal or vertical fixing.

To advice for ISO cards with an
intensity of 0,76 + / - 0,08 mm
inside dimensions: 85 x 53 mm
outside dimensions: 90 x 57 mm

Material: Polycarbonate / Made in Germany

For short clip 013031. (Product-ID 013031).

Request for this product (Product-ID 013028)

Title:
Name*:
E-Mail*:
Phone:
Company:
Address:
Quantity*:
Comment:
*Mandatory



Card holders clear:


Card holder clear          Product description
Card holder clear          Card holder clear, vertical, with mounting bracket and thumb notch.

To advice for ISO cards with an
intensity of 0,76 + / - 0,08 mm
inside dimensions: 85 x 54 mm
outside dimensions: 91 x 57 mm

Material: Polycarbonate / Made in Germany

Request for this product (Product-ID 013049K)

Title:
Name*:
E-Mail*:
Phone:
Company:
Address:
Quantity*:
Comment:
*Mandatory



Permanent-locking card holder clear          Product description
Permanent-locking card holder clear          Permanent-locking card holder clear, vertical, with long slot for clip and locking piece.

To advice for ISO cards with a
total iotensity of 1,10 mm
inside dimensions: 54 x 85 mm
outside dimensions: 59 x 94 mm

Request for this product (Product-ID 013162)

Title:
Name*:
E-Mail*:
Phone:
Company:
Address:
Quantity*:
Comment:
*Mandatory



Card holder front side frosted/back side clear          Product description
Card holder front side frosted/back side clear          Card holder front side frosted/back side clear, vertical, with mounting bracket and thumb notch.

To advice for ISO cards with an
intensity of 0,76 + / - 0,08 mm
inside dimensions: 85 x 54 mm
outside dimensions: 91 x 57 mm

Material: Polycarbonate / Made in Germany

Request for this product (Product-ID 013049)

Title:
Name*:
E-Mail*:
Phone:
Company:
Address:
Quantity*:
Comment:
*Mandatory



Card holder clear          Product description
Card holder clear          Card holder clear, vertical, with mounting bracket and thumb notch.

Specially to recommend for cards with a thickness of 1,50 mm.
inside dimensions: 86 x 54 mm
outside dimensions: 92 x 57 mm

Request for this product (Product-ID 013150)

Title:
Name*:
E-Mail*:
Phone:
Company:
Address:
Quantity*:
Comment:
*Mandatory



Locking card holder front side clear/ back side frosted          Product description
Locking card holder front side clear/ back side frosted          Locking card holder front side clear/ back side frosted, horizontal/vertical, with long slot and locking piece.

To advice for ISO cards with a
total intensity of 2,9 mm
inside dimensions: 55 x 85 mm
outside dimensions: 62 x 96 mm

Material: Polycarbonate / Made in Germany
In combination with unlock key (Product-ID 013035).

Request for this product (Product-ID 013030)

Title:
Name*:
E-Mail*:
Phone:
Company:
Address:
Quantity*:
Comment:
*Mandatory