CONTACT
Card holders, horizontal

Card holders frosted:

Card holder frosted          Product description
Card holder frosted          Card holder frosted, horizontal, with long slot for clip, two round holes and thumb notch.

To advice for ISO cards wiht an
intensity of 0,76 + / - 0,04 mm
inside dimensions: 85 x 54 mm
outside dimensions: 94x 62 mm

Material: Polycarbonate / Made in Germany

Request for this product (Product-ID 013027)

Title:
Name*:
E-Mail*:
Phone:
Company:
Address:
Quantity*:
Comment:
*Mandatory



Card holder frosted          Product description
Card holder frosted          Card holder frosted, horizontal, with long slot for clip, two round holes and thumb notch. With pin for horizontal fixing.
For short clip 013031.

To advice for ISO cards with an
intensity of 0,76 + / - 0,08 mm
inside dimensions: 85 x 54 mm
outside dimensions: 90x 65 mm

Request for this product (Product-ID 013176)

Title:
Name*:
E-Mail*:
Phone:
Company:
Address:
Quantity*:
Comment:
*Mandatory



Card holder - POCKET DSPENSER frosted          Product description
Card holder - POCKET DSPENSER frosted          Card holder - POCKET DSPENSER frosted, horizontal, with thumb notch.

To advice for ISO cards with an
intensity of 0,76 + / - 0,08 mm
inside dimensions: 85 x 54 mm
outside dimensions: 90 x 57 mm

Material: Polycarbonate / Made in Germany

Request for this product (Product-ID 013026)

Title:
Name*:
E-Mail*:
Phone:
Company:
Address:
Quantity*:
Comment:
*Mandatory



Card holder frosted          Product description
Card holder frosted          Card holder frosted, horizontal, with long slot for clip, two round holes.

To advice for ISO cards with an
intensity of 0,76 + / - 0,08 mm
inside dimensions: 52 x 83 mm
outside dimensions: 62 x 64 mm

Material: Polycarbonate
Available with red, transparent and black extractor slide.

Request for this product (Product-ID 013029)

Title:
Name*:
E-Mail*:
Phone:
Company:
Address:
Colour
Quantity*:
Comment:
*Mandatory



Card holder frosted          Product description
Card holder frosted          Card holder frosted, horizontal, with long slot for clip, two round holes, for two cards.

To advice for ISO cards with an
intensity of 0,76 + / - 0,08 mm
inside dimensions: 56 x 85 mm
outside dimensions: 62 x 91 mm

Material: Polycarbonate
Available with two red, transparent and black extractor slides.

Request for this product (Product-ID 013029D)

Title:
Name*:
E-Mail*:
Phone:
Company:
Address:
Colour
Quantity*:
Comment:
*Mandatory



Permanent-locking card holder frosted          Product description
Permanent-locking card holder frosted          Permanent-locking card holder frosted, horizontal, with long slot and locking piece.

To advice for ISO cards with a
total intensity of 2,9 mm
inside dimensions: 63 x 94 mm
outside dimensions: 54 x 85 mm

Material: Polycarbonate / Made in Germany

Request for this product (Product-ID 013045)

Title:
Name*:
E-Mail*:
Phone:
Company:
Address:
Quantity*:
Comment:
*Mandatory



Locking card holder front side clear/ back side frosted          Product description
Locking card holder front side clear/ back side frosted          Locking card holder front side clear/ back side frosted, horizontal/vertical, with long slot and locking piece.

To advice for ISO cards with a
total intensity of 2,9 mm
inside dimensions: 55 x 85 mm
outside dimensions: 62 x 96 mm

Material: Polycarbonate / Made in Germany
In combination with unlock key (Product-ID 013035).

Request for this product (Product-ID 013030)

Title:
Name*:
E-Mail*:
Phone:
Company:
Address:
Quantity*:
Comment:
*Mandatory


Card holder Vario, frosted          Product description
Card holder Vario, frosted          Card holder Vario, frosted, horizontal/vertical, with thumb notch. With two pins for horizontal or vertical fixing.

To advice for ISO cards with an
intensity of 0,76 + / - 0,08 mm
inside dimensions: 85 x 53 mm
outisde dimensions: 90 x 57 mm

Material: Polycarbonate / Made in Germany

For short clip (Product-ID 013031).

Request for this product (Product-ID 013028)

Title:
Name*:
E-Mail*:
Phone:
Company:
Address:
Quantity*:
Comment:
*Mandatory



Card holders clear:


Card holder clear, horizontal          Product description
Card holder clear, horizontal          Card holder clear, horizontal with long slot for clip and thumb notch.

To advice for ISO cards with an
intensity of 0,76 + / - 0,08 mm
inside dimensions: 85 x 54 mm
outside dimensions: 91 x 68 mm
Thickness: 5 mm

Request for this product (Product-ID 013190)

Title:
Name*:
E-Mail*:
Phone:
Company:
Address:
Quantity*:
Comment:
*Mandatory



Card holder clear          Product description
Card holder clear          Card holder clear, horizontal, with long slot for clip and thumb notch.

Specially to recommend for cards with a thickness of 1,38 mm.
inside dimensions: 88 x 53,8 mm
outside dimensions: 92 x 70 mm

Material: Polycarbonate

Request for this product (Product-ID 013160)

Title:
Name*:
E-Mail*:
Phone:
Company:
Address:
Quantity*:
Comment:
*Mandatory



Card holder clear          Product description
Card holder clear          Card holder clear, horizontal, thumb notch, integrated eyelet for chain or key ring.

To advice for ISO cards with an
intensity of 0,76 + / - 0,08 mm
inside dimensions: 85 x 54 mm
outside dimensions: 92 x 57 mm

Request for this product (Product-ID 013155)

Title:
Name*:
E-Mail*:
Phone:
Company:
Address:
Quantity*:
Comment:
*Mandatory


Zurück